Description
Features
- Bearing seals are double-lipped rubber that provides superior exclusion of water, dirt and sand with improved grease retention
- Steel garter spring guarantees constant pressure on the axle shaft, extending the life of the seal
- Wheel seals are type TC nitrile elastomer, specifically designed to keep out water, dirt and sand
- Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors
- Seals have a rubber-coated outside diameter that creates an optimum seal at the hub
- Kit includes all required bearings and seals to refit a wheel
- High-speed, low-drag bearings are EMQ quality
- Kits are per wheel.
- For MX1 hubs.
Fitments
| Year | Make | Model |
| 2003-2005 | Polaris | Magnum 330 4×2 |
| 2003-2004 | Polaris | Trail Boss 330 |
| 2003 | Polaris | Trail Blazer 400 |
| 2002 | Polaris | Magnum 500 4×4 |
| 2001-2002 | Polaris | Scrambler 500 4×2 |
| 2000-2002 | Polaris | Scrambler 500 4×4 |
| 2000-2002 | Polaris | Trail Boss 325 |
| 2000-2002 | Polaris | Scrambler 400 4×2 |
| 2000-2002 | Polaris | Magnum 325 4×2 |
| 1996-1999 | Polaris | Xpress 300 |
| 1996-1997 | Polaris | Xpress 400 L 4×2 |
| 1995-1998 | Polaris | Magnum 425 4×2 |
| 1994-1999 | Polaris | Sport 400 |
| 1994-1995 | Polaris | 300 4×2 |
| 1994-1995 | Polaris | 400 L 4×2 |
| 1994 | Polaris | 400 L 4×4 |
| 1990-2004 | Polaris | Trail Blazer 250 |
| 1990-1993 | Polaris | Trail Boss 350 L 4×2 |
| 1989-1992 | Polaris | Big Boss 250 4×6 |
| 1988-1993 | Polaris | Trail Boss 250 4×2 |
| 1988-1989 | Polaris | Trail Boss 250 RES 4×2 |
| 1988 | Polaris | Trail Boss 250 4×4 |
| 1988 | Polaris | Trail Boss 250 R |
| 1988 | Polaris | Trail Boss 250 ES |
Reviews
There are no reviews yet.